2 – اقتراح باستخدام ماء الحنفية كوقود للسيارات
PRELIMINARY PLANS TO RUN YOUR CAR ON TAP WATER!
This is simply an efficient way to convert ordinary tap water into gaseous hydrogen and oxygen, and then burn these vapors in the engine, instead of gasoline.
This "minisystem" runs easily from your existing battery and electrical system, and it plugs into your carburetor with simple off-the-shelf fittings.
You will be installing a plastic water tank, a control circuit, a reaction chamber, a hipressure carb/FI fitting, and 3 gauges, and then hooking into your existing carb/FI.
How It Works
Exceedingly simple. Water is pumped as needed to replenish and maintain the liquid level in the chamber. The electrodes are vibrated with a 0.5-5A electrical pulse which breaks 2(H2O) => 2H2 + O2. When the pressure reaches say 30-60 psi, you turn the key and go.
You step on the pedal, you send more energy to the electrodes, and thus more vapor to
the cylinders; i.e. fuel vapor on demand.
في المرفق تفصيلات التركيب والتشغيل




الملفات المرفقة
نوع الملف: pdf Run_your_car_on_tap_water .pdf‏ (507.3 كيلوبايت
رابط تحميل الملف
ملتقى المهندسين العرب